Technology

Wind directors: how a passive structure nearly doubles annual output

How passive panels redirect wind into the rotor -- and what the yield numbers show.

The WindWhisperer Ultra adds no extra generator, no additional electronics, and no moving parts. It adds panels. Four to five vertical panels, fixed to the stator, extending radially outward at turbine height. That is the entire modification. The output difference is substantial.

What wind directors actually do

A vertical axis wind turbine rotor intercepts wind across its swept area. Without any channelling, the wind that does not strike the rotor passes around it. Wind directors are flat vertical panels positioned to intercept that bypassing air and redirect it into the rotor's oncoming side.

The effect is a concentrated inflow on the advancing blade face and a partial wind shadow on the retreating side -- a favourable differential that increases the net torque driving the rotor. No energy is added to the system; the same wind does more work.

The numbers at each wind speed

The power curve illustrates the effect precisely. At 4.2 m/s -- a light breeze, common across most Northern European sites -- the WindWhisperer 100 Max produces approximately 29,000 kWh annually. The Ultra, with wind directors fitted, produces 41,000 kWh at the same wind speed. At 7.0 m/s the figures are 133,000 kWh versus 223,000 kWh. The Ultra reaches rated output at 8.3 m/s; the Max reaches the same figure at 10.5 m/s.

The annual output figures reflect this across a realistic wind distribution. The WindWhisperer 100 Max produces ~230 MWh per year at a site averaging 6 hours of useful generation daily. The WindWhisperer 100 Ultra produces ~439 MWh under the same conditions -- a 91% increase from the same rotor, same generator, and same installation footprint.

Installation and footprint implications

Wind directors extend 2--5 m radially outward from the turbine stator. The exact reach is configurable at installation and depends on the available rooftop area or mast clearance. A turbine on a flat rooftop with generous clearance can be fitted with the full 5 m extension; a constrained installation may use 2--3 m panels with proportionally reduced gain.

The panels are structural elements anchored to the stator frame. They require no wiring, no control system, and no maintenance schedule beyond the standard annual turbine inspection. Certified third-party installers assess the available space during the site survey and specify the appropriate panel configuration.

When the Ultra configuration makes sense

The decision turns on two factors: available rooftop area and target annual output. Where a site has the space and the energy demand to absorb a higher yield, the Ultra configuration materially improves the return on investment by increasing output without increasing generator, inverter, or battery costs. The 430 kWh lithium (included) included as standard accommodates the higher generation rate without modification.

Sites with constrained rooftop space -- or where the Max output already covers the site's full self-consumption potential -- may find the base Max configuration the more appropriate choice. Both models share the same grid connection standards, certification, and installation process.

Key takeaways

References

See also: What wind speed does a VAWT need? · How much energy will a VAWT produce? · Full FAQ